Abstracts – Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 44 results ...
Adjei, E A (2015) Multi-objective optimisation of building design variables and its impact on office building performance: a case for Ghana, Unpublished PhD Thesis, , University of Nottingham.
Al-Jibouri, S H (1985) Cost models for construction, Unpublished PhD Thesis, , University of Nottingham.
Alzahrani, A (2017) The social value of urban design in mixed use developments in London, Unpublished PhD Thesis, , University of Nottingham.
Awad, A M (2005) The interaction between project finance of a large-scale construction project and macroeconomic indicators and policies, Unpublished PhD Thesis, , University of Nottingham.
Bailey, D (2016) A performance evaluation of mainstream timber framed and traditional masonry housing in the UK, Unpublished PhD Thesis, Department of Architecture and Built Environment, University of Nottingham.
- Type: Thesis
- Keywords: case study; climate change; construction method; evaluation; fabrication; housing development; interview; life cycle analysis; masonry; prefabrication; sensors; skills; timber; United Kingdom
- ISBN/ISSN:
- URL: http://eprints.nottingham.ac.uk/33628/
- Abstract:
Within the UK traditional masonry construction techniques are struggling to deliver the quantity and ecological quality of housing required by an ever increasing UK population. This research employs a case study review of a mainstream mixed timber frame and masonry housing development - Green Street, in order to explore the ecological viability of timber prefabrication as an alternative to the established masonry construction methods currently employed in the majority of British housing. Four houses of each construction type in the Green Street development were outfitted with a number of environmental monitoring sensors for continuous monitoring. In addition the study incorporates fabric testing in the form of air permeability testing, Co-heating analysis, thermography, and a life cycle analysis. Building Use Survey, project management and design team interviews and an industry questionnaire form the final part of the evaluation protocol. The study revealed that heating the timber dwellings ultimately required less energy per degree difference between inside and outside temperatures. During the summer the timber housing displays a greater diurnal temperature swing, while on average the temperature remains consistently lower than the masonry housing. The masonry housing was found to be both more air tight and exhibiting a lower heat loss coefficient, despite that, the performance gap between design and reality for space heating is less in the timber prefabricated housing. The life cycle analysis revealed that the timber walls have a lower impact on climate change. BUS methodology results found that construction type had little to no impact on occupants. The design team review highlighted the need for a greater level of prefabrication in timber housing to increase precision and work around a serious skills shortage. An industry questionnaire suggested that timber construction in the UK can often suffer from poor construction practice, predicated by a gap in specialized knowledge. The research concludes that in this instance, the timber prefabrication technique produced dwellings that perform ecologically on par with their masonry counterparts. In answering the research question, the evidence suggests that at this stage the technique would be better employed on a case by case basis and supported by specialists in timber fabrication, rather than implemented as a blanket alternative for existing masonry construction. Already a number of insights from this research have filtered into industry practice and will continue to better inform both industrial and academic partners in their decisions regarding the use of timber prefabrication in mainstream UK housing.
Bordalo Faustino, P (2017) Public procurement award criteria in the EU member states: a comparative study of the discretionary powers of contracting authorities, Unpublished PhD Thesis, School of Law, University of Nottingham.
Bresnen, M J (1986) A study of forms of project organisation and matrix management: case studies from the construction industry, Unpublished PhD Thesis, Business School, University of Nottingham.
Brown, J D (2012) Corporate responsibility in the UK construction industry: a study of activities and reporting, Unpublished PhD Thesis, Department of Civil Engineering, University of Nottingham.
Calvert, G S (2021) A multiple defect approach to bridge life cycle modelling, Unpublished PhD Thesis, , University of Nottingham.
Capra, M (2010) Collaborative mixed reality environments: an application for civil engineering, Unpublished PhD Thesis, Department of Civil Engineering, University of Nottingham.
Chen, C (2019) Heterogeneous integration of BIM with low-cost indoor mobile laser scanning method for building fabric maintenance in China, Unpublished PhD Thesis, Department of Architecture and Built Environment, University of Nottingham.
Colley, J G (2011) An exploration of competitive advantage in the plasterboard industry, Unpublished PhD Thesis, Business School, University of Nottingham.
Dawson, P J (1997) A hierarchical approach to the management of construction project risk, Unpublished PhD Thesis, Department of Civil Engineering, University of Nottingham.
Dickens, G (2002) Teamworking, perceptions and communication within construction projects, Unpublished PhD Thesis, , University of Nottingham.
Fadoul, A (2020) A BIM-based model for constructability assessment of buildings design, Unpublished PhD Thesis, Department of Civil Engineering, University of Nottingham.
Fahdah, I (2008) Distributed IT for integration and communication of engineering information for collaborative building design, Unpublished PhD Thesis, , University of Nottingham.
Hassan, H (2020) Psychosocial risks among migrant workers in the Middle East construction sector, Unpublished PhD Thesis, School of Medicine, University of Nottingham.
Hernandez Delgado, O A (1998) Decision-making for the selection of investment projects, Unpublished PhD Thesis, , The University of Nottingham.
Jaly Zada, A J (2016) Versioning of IFC-based information models for collaborative design, Unpublished PhD Thesis, Department of Civil Engineering, University of Nottingham.
Jones, C (2014) Assessing safety culture and safety performance in a high hazard industry, Unpublished PhD Thesis, School of Medicine, University of Nottingham.
Langdon, M (2021) Towards a shift of values in rail infrastructure project evaluation, Unpublished PhD Thesis, , University of Nottingham.
Long, G (2010) A detailed investigation of the applicability and utility of simulation and gaming in the teaching of civil engineering students, Unpublished PhD Thesis, , University of Nottingham.
Mohammad Shamsudin, N A (2021) Perceptions of critical success factors in the management of dilapidated schools' reconstruction projects using Industrialised Building System method in rural areas in Sarawak, Unpublished PhD Thesis, , University of Nottingham.
Morgan, D C (1986) Site layout and construction planning, Unpublished PhD Thesis, Department of Civil Engineering, University of Nottingham.
Nicholson, M P (1995) Architectural management: From Higgin to Latham, Unpublished PhD Thesis, , University of Nottingham.
Nunes, M C M (1997) Enabling the use of alternative materials in road construction, Unpublished PhD Thesis, , University of Nottingham.
Osorio-Sandoval, C A (2021) BIM-based construction simulation modelling, Unpublished PhD Thesis, , University of Nottingham.
Oti, A H (2014) Building information modelling for sustainability appraisal of conceptual design of steel-framed buildings, Unpublished PhD Thesis, Department of Civil Engineering, University of Nottingham.
Oussadou, A (1988) Residential satisfaction in the new urban housing projects in Algeria: a case study of Ain-Allah, Algiers, Unpublished PhD Thesis, Department of Architecture and Planning, University of Nottingham.
Pachnou, D (2003) The effectiveness of bidder remedies for enforcing the EC public procurement rules: a case study of the public works sector in the United Kingdom and Greece, Unpublished PhD Thesis, School of Law, University of Nottingham.
Pantouvakis, J-P (1990) Declarative - configurable estimating systems for the construction industry, Unpublished PhD Thesis, , University of Nottingham.
Patterson, D E (1997) Earthworks planning for linear construction projects, Unpublished PhD Thesis, , University of Nottingham.
Roshani, D (2005) Integrated collaborative building design using internet technology, Unpublished PhD Thesis, Department of Civil Engineering, University of Nottingham.
Siebert, M (2019) Concrete and the barriers to innovation in UK housebuilding, Unpublished PhD Thesis, , University of Nottingham.
Stiles, S (2019) Investigation of safety leadership within infrastructure engineering construction projects, Unpublished PhD Thesis, , University of Nottingham.
Telles, P (2011) Competitive dialogue in Portugal and Spain, Unpublished PhD Thesis, , University of Nottingham.
Tene Nengou, C B (2019) Framework for the effective implementation of building regulations and policies: The case of Sub-Sahara African countries, Unpublished PhD Thesis, , University of Nottingham.
Wang, D (2013) Exploring factors associated with workers' safety rule violations in the Chinese construction industry: a multimethod investigation, Unpublished PhD Thesis, School of Medicine, University of Nottingham.
Wantanakorn, D (2000) Effects of management errors on construction projects, Unpublished PhD Thesis, , University of Nottingham.
Wei, Y (2019) Data-driven approaches for analysis of building energy consumption and indoor occupancy behavior, Unpublished PhD Thesis, Department of Architecture and Built Environment, University of Nottingham.
Zhang, L (2021) Artificial neural network intelligent technique and multiple nonlinear regression for prediction and optimization of the transmittance of lightpipes and implementation in BIM, Unpublished PhD Thesis, , University of Nottingham.
Zhang, P (2018) Mapping buried utilities in difficult environments, Unpublished PhD Thesis, Department of Civil Engineering, University of Nottingham.
Zhang, S (2022) The development of a low carbon prefabricated house, Unpublished PhD Thesis, , University of Nottingham.
Zhou, S (2017) Project learning, knowledge transfer and the adoption of innovation in project-based organizations, Unpublished PhD Thesis, Business School China, University of Nottingham.